7 inch stand on dash TFT colour monitor MON508

£84.00


  • Product Code: MON508

This is the same monitor that is used in our SYS333 systems and has proved its reliabilty over a number of years. It uses a LED backlight in the LCD panel which gives better colour and longer life than the cheaper CCLP backlights. The monitor comes with a stand and headrest frame. It has two AV inputs and can be connected to the reversing light to come on automatically when reverse is selected. We have combined this monitor with a number of our cameras in money off bundles.

7 inch stand on dash colour TFT monitor

The picture above shows the full kit that comes with the monitor. It can be removed from its headrest frame to be used as a stand on dash monitor. If you have a suitable area the headrest frame does allow it to be mounted in the headlining, sun visor or dashboard.

7 inch stand on dash monitor headrest frame

The headrest frame allows the monitor to be inset into any flat area of trim. It can be useful if you have fairly chunky sun visors or trim over the windscreen. The monitor clips easily into the frame - slightly less easy to remove it!

7 inch colour TFT flat screen monitor windscreen mounted

Although the monitor is described as stand on dash, the bracket does slide allowing it to be roof mounted or in this case mounted on the windscreen replacing the rear view mirror. The monitor is 180mm (W) x120mm (H) x 15mm thick at its thickest.  The buttons on the monitor can turn the camera system on a switch between AV1 and AV2. This makes it easy to change between the views from two cameras if you have a second camera fitted

Specification

7" Headrest TFT LCD Monitor w/remote & stand
Screen:7 inch AU new panel
Display format : 16:9
Video: Dual video input
OSD On Screen Display
Resolution: 1440(W) X 234(H)=336960pixels
Consumption:7.5W
Power Supply: DC 12V
System:PAL/ NTSC
Earphone output
1 way audio input
Blue screen:Blue screen when no signal
Full function remote control
Stand Included
IR function

 

Mobile Site